Rca Rcr4358r Manual ⭐

Remove batteries, hold the POWER button for 30 seconds to discharge residual power, then reinsert fresh batteries.

Press every 5 seconds. The remote will cycle through codes until your device turns off. Rca Rcr4358R Manual

While holding that button, the POWER key. The LED will turn off, then turn back on after three seconds. Release both keys. The LED should remain lit. Remove batteries, hold the POWER button for 30

There are three primary ways to program this remote to your devices. Always point the remote at the device's IR sensor during the process. While holding that button, the POWER key

Do not mix old and new batteries or different battery types (e.g., alkaline with rechargeable).

Release the device button. If the light turns off, the code is saved. Turn on the device you want to program.

the device button ( TV , SAT•CBL , etc.). The LED will turn on.