Linksys Network Hub Nh1005 Manual Pdf Txt Guide

While a standalone PDF for the NH1005 specifically can be hard to find due to its age, it belongs to the EtherFast® 10/100 Workgroup Hubs series, which shares identical setup and operation.

Use standard Cat5e or better Ethernet cables to connect your computers, printers, or other network devices to any of the 5 ports. Linksys Network Hub Nh1005 Manual Pdf txt

Ensure the adapter matches the required voltage (check the bottom of the hub). While a standalone PDF for the NH1005 specifically

To connect this hub to another hub or a router, use the dedicated Uplink port (usually shared with Port 5 or labeled separately). To connect this hub to another hub or

If your model has an MDI/MDIX button, it must be depressed to use the uplink capability. LED Indicator Meanings Power Unit is powered on and ready Link/Act Port has a valid 10/100Mbps connection Link/Act Data is being transmitted or received 10/100M Port is operating at 100Mbps (Fast Ethernet) 10/100M Port is operating at 10Mbps status FDX/Col Port is in Full-duplex mode FDX/Col Collisions occurred (Port is in Half-duplex) Troubleshooting Tips

Are you trying to connect this hub to a or just between two older computers? EtherFast® 10/100 Workgroup Hubs - Linksys

If only one device works, try power-cycling the hub by unplugging it for 10 seconds.