is stuck on "Load" or a red light, you may need a tool on a PC. This requires a RS232-to-mini-jack cable to flash the firmware directly from your computer to the receiver's board.
is a compact digital satellite receiver. The specific board version, EXC1506C DDRII Download TABSAT 500 MINI BORD EXC1506C DDRII rar
: A progress bar will appear. Do not turn off the power during this time, as it can permanently damage the receiver. The device will usually reboot automatically once finished. Recovery (If the Device Won't Boot) TABSAT 500 is stuck on "Load" or a red light,
A500 Mini Firmware Update V1.1.0 - NOW Play ADF files Easily! The specific board version, EXC1506C DDRII : A
: Plug the stick into the USB port of the receiver while it is powered on.
: Use the remote to go to Menu > Setting > Upgrade > USB Upgrade .
: Use a high-quality USB stick formatted to FAT32 . Copy the extracted .bin file directly to the root directory of the drive; do not place it inside a folder. Installation Steps For most Sunplus-based mini receivers like the TABSAT 500 , follow these steps: