721-.rar -

Set the output device to the correct found in your computer's Device Manager. Ensure the Baud Rate is set to 9600 . VinylMaster Setup :

: Place your vinyl under the pinch rollers and lock them down.

is a 28-inch model typically requiring a stand for stability. : 721-.rar

: Use the arrow keys on the cutter's control panel to move the blade to your starting point and press "Origin" or "Local" to set the zero point.

: Always use the "Test" button on the cutter or the "Area Test" in your software to ensure the carriage moves correctly before wasting material. Vinyl U.S. Cutter set up MH 721-MK2 28" Set the output device to the correct found

If you are using the USB connection, you must install the proper drivers to create a virtual COM port.

typically uses commands. You must match the software settings to the cutter's hardware settings. SignCut Setup : Select "Refine" as the manufacturer and " " as the model. is a 28-inch model typically requiring a stand for stability

: Download the "MH series USB driver" (often listed as